Post by RobertW on Jun 27, 2016 11:13:16 GMT -5
Will try it out later today.
As expected, boomy when used on amp. But I doubt is was intended for live amplified work. I'm pretty sure it was designed for recording. I will try to record something with it. It cannot be worse than the condenser lapel mic I used for years.
Phone plug, preamp (vol only) and mic soundhole brace are all one unit...so are a bit unwieldy.
preamp uses a 2032 button battery to drive the preamp.
The mic sits in sound hole about an inch below guitar top, aimed towards neck when wire is exiting below strings. I think i would have preferred to be able to turn the mic off axis. That is not possible with this design.
