String tension (one question at least)

Derick , I used the Martin web site just for tension reference- though I am considering different labeling
but, the web site doesn't list individual string tension, so, are we to presume, or assume, each string is the same tension? If so, then the high E should be plenty strong enough to hold me up- not that it matters, but, it is a curiosity...

I've been thinking about the feed back situation and strings- my D240E didn't do it, so I looked at the specs- the DS has a 24 3/4 in scale and the The D240E has a 25 1/2 in scale- I plugged in here at home and though I'm not getting feed back (I don't have a mic hooked up) it sounds a lot different... the DS also has a 4 in sound hole where the other one is 3 7/8-

Gonna take some 'sperimenting

130 lbs is the TOTAL tension on the strings. Since they already have that load on them, I doubt they would hold more than another 10-20% before breaking.

The scale length and tuning do make a difference. There must be charts or calculations somewhere.

I'D PAY TO SEE THAT!!